1 - 28 of 53 Listings
Lot # 9920
2004 CASE IH STX325
300 HP or Greater Tractors
Sold On:Wednesday, Aug 19, 2026 (CDT)
Hours: 9,132
Rear Remote Hydraulics: 4
Rear PTO: Yes
Transmission Type: Powershift
Drive: 4WD
Serial Number: JEE0112706
Description: CASE IH STX 325 - PTO - 3 POINT - 4 HYDRAULICS - POWER SHIFT TRANSMISSION - NEW FUEL PUMP RECENTLY AND TUNED TO 375 HP - GOOD WORKING TRACTOR - US...
Updated: Wednesday, August 19, 2026 04:03 PM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Lot # 10645
1977 VERSATILE 800
175 HP to 299 HP Tractors
Sold On:Wednesday, Aug 19, 2026 (CDT)
Hours: 2,037
Rear Remote Hydraulics: 3
Transmission Type: Gear Drive
Drive: 4WD
Engine Horsepower: 250 HP
Serial Number: 8003030058
Description: 800 VERSATILE 4WD - LIKE NEW 18.4/38 FIRESTONE RADIALS - A/C WORKS GOOD - 3 HYDRAULICS - RUNS GREAT - OWNER NO LONGER NEEDS
Updated: Wednesday, August 19, 2026 03:58 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Lot # 4340
J I CASE 2390
175 HP to 299 HP Tractors
Auction Ended:Wed, Aug 19, 2026 03:26 PM (CDT)
Hours: 10,557
Rear Remote Hydraulics: 2
Rear PTO: Yes
Transmission Type: Powershift
Drive: 2WD
Engine Horsepower: 178 HP
Description: 2390 CASE - 10,557 HOURS SHOWING - PTO - 3 POINT - 2 HYDRAULICS - STARTS, RUNS AND DRIVES BUT SHUTS DOWN AFTER ABOUT 10 MINUTES - NOT SURE WHAT'S W...
Updated: Wednesday, August 19, 2026 03:42 PM
Location: Walhalla, North Dakota
Seller: Moore Auctions LLC
Capacity: 6,750 gal
Number of Tanks: 4
Number of Axles: Tandem
Mounted: Yes
Serial Number: UNKNOWN
Condition: Used
Description: NICE 1996 GREAT DANE 53' DRY VAN WATER TRAILER - 4 TANKS - 2 MIXING CONES - HONDA PUMP - HOSE REEL - REAR STEP - LIKE NEW RUBBER - VERY NICE CONDITION
Updated: Wednesday, August 19, 2026 02:14 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Capacity: 16 ton
Number of Hoppers: 2
Number of Axles: Tandem
Mounted: Yes
Serial Number: 1HSZEGGR4JH535817
Condition: Used
Description: NICE INTERNATIONAL TENDER TRUCK - 16 TON WILLMAR BOX - REAR DISCHARGE AUGER - ROLL TARP - L 10 CUMMINS ENGINE - 9 SPEED - GOOD WORKING TENDER TRUCK...
Updated: Wednesday, August 19, 2026 02:13 PM
Location: Walhalla, North Dakota
Seller: Moore Auctions LLC
Capacity: 16 ton
Number of Hoppers: 2
Number of Axles: Tandem
Mounted: Yes
Serial Number: 9941048
Condition: Used
Description: NICE INTERNATIONAL TENDER TRUCK - 16 TON SIMONSEN STAINLESS STEEL BOX - REAR DISCHARGE AUGER - ROLL TARP - 3176 CATERPILLAR ENGINE- 9 SPEED - GOOD ...
Updated: Wednesday, August 19, 2026 02:08 PM
Location: Walhalla, North Dakota
Seller: Moore Auctions LLC
Length: 40 ft
Serial Number: UNKNOWN
Condition: Used
Description: 40' GOOSENECK HEADER TRAILER BUILT BY BISON MFG IN JAMESTOWN ND - HEAVY DUTY CONSTRUCTION - 10,000# AXLES - GOOD WORKING TRAILER - OWNER HAS USED S...
Updated: Wednesday, August 19, 2026 01:40 PM
Location: Jamestown, North Dakota
Seller: Moore Auctions LLC
Lot # 9860
2015 NEW HOLLAND 740CF-35
Platform Headers
Sold On:Wednesday, Aug 19, 2026 (CDT)
Cutting Width: 35 ft
Cutterbar Type: Flex
Serial Number: YEH430046
Condition: Used
Fore/Aft Reel: Yes
Poly Skid Shoes: Yes
Description: NICE 2015 NEW HOLLAND 740CF-35 FLEX HEADER - VERY CLEAN AND WELL MAINTAINED HEADER - FULL FINGER AUGER - SINGLE POINT HYDRAULICS - OWNER RETIRED AN...
Updated: Wednesday, August 19, 2026 01:12 PM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Cutting Width: 45 ft
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 290152
Condition: Used
Fore/Aft Reel: Yes
Description: NICE 2016 45' MAC DON FD75D - LEXION ADAPTER - DOUBLE KNIFE DRIVE - PEA AUGER - CRARY AIR BAR - GOOD POLY, GUARDS, AND SECTIONS - OWNER UPDATED TO ...
Updated: Wednesday, August 19, 2026 01:09 PM
Location: Langdon, North Dakota
Seller: Moore Auctions LLC
Lot # 10745
2005 MAC DON 974
Platform Headers
Auction Ended:Wed, Aug 19, 2026 12:49 PM (CDT)
Cutting Width: 36 ft
Cutterbar Type: Flex
Serial Number: 165835
Condition: Used
Fore/Aft Reel: Yes
Split Reel: Yes
Description: NICE 2006 MAC DON 974 FLEX DRAPER - GOOD BELTS - NEW SICKLE - JOHN DEERE ADAPTER - GOOD WORKING HEADER - OWNER UPDATED COMBINES AND NO LONGER NEEDS...
Updated: Wednesday, August 19, 2026 01:07 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Lot # 10747
2006 MAC DON 974
Platform Headers
Auction Ended:Wed, Aug 19, 2026 12:49 PM (CDT)
Cutting Width: 36 ft
Cutterbar Type: Flex
Serial Number: 169692
Condition: Used
Fore/Aft Reel: Yes
Split Reel: Yes
Description: NICE 2006 MAC DON 974 FLEX DRAPER - GOOD BELTS - NEW SICKLE - JOHN DEERE ADAPTER - GOOD WORKING HEADER - OWNER UPDATED COMBINES AND NO LONGER NEEDS...
Updated: Wednesday, August 19, 2026 01:07 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Cutting Width: 40 ft
Cutterbar Type: Flex
Serial Number: 199623
Condition: Used
Fore/Aft Reel: Yes
Draper Cross Auger: Yes
Description: NICE 2010 MAC DON FD70 W/ CASE IH FLAGSHIP ADAPTER - 40' CUT - PEA AUGER - GOOD CANVASES AND CUTTERBAR - WAS USED ON HIS 8120 THROUGH THE 2025 HARV...
Updated: Wednesday, August 19, 2026 01:05 PM
Location: Jamestown, North Dakota
Seller: Moore Auctions LLC
Lot # 9855
2008 HONEY BEE SP42
Platform Headers
Auction Ended:Wed, Aug 19, 2026 12:33 PM (CDT)
Cutting Width: 42 ft
Cutterbar Type: Rigid
Serial Number: 420600866
Condition: Used
Fore/Aft Reel: Yes
Split Reel: Yes
Description: 42' HONEY BEE RIGID DRAPER - GOOD WORKING HEADER - OWNER RETIRED AND NO LONGER NEEDS - FOR MORE INFORMATION CALL RODNEY @ 701-370-1214
Updated: Wednesday, August 19, 2026 12:49 PM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Cutting Width: 30 ft
Serial Number: AGCM92200BHS01142
Condition: Used
Description: NICE MASSEY FERGUSON 9220 SWATHER - 30' AGCO 5200 DRAPER HEADER - ONLY 903 TOTAL HOURS - CUMMINS ENGINE - SWATH ROLLER INCLUDED - VERY CLEAN AND WE...
Updated: Wednesday, August 19, 2026 12:40 PM
Location: Langdon, North Dakota
Seller: Moore Auctions LLC
Lot # 10741
ALLOWAY 2130
Row Crop Cultivators
Auction Ended:Wed, Aug 19, 2026 12:09 PM (CDT)
Number of Rows: 24
Row Spacing: 22 in
Condition: Used
Shank Type: S-Tine
Folding: Yes
Gauge Wheels: Yes
Description: 24R22 ALLOWAY 2130 ROW CROP CULTIVATOR - 3 POINT WITH LIFT ASSIST - S-TINE SHANKS (3 PER ROW) - GOOD WORKING CONDITION - OWNER NO LONGER NEEDS - FO...
Updated: Wednesday, August 19, 2026 12:26 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Hours: 4,800
Separator Hours: 3,000
Drive: 2WD
Rear Attachment: Straw Chopper
Horsepower: 325 HP
Serial Number: H09750S686055
Description: NICE 2000 JOHN DEERE 9750STS - GOOD WORKING CONDITION - LOTS OF UPDATES INCLUDING BULLET ROTOR - CLEAN, WELL MAINTAINED, AND STORED INSIDE - FOR MO...
Updated: Wednesday, August 19, 2026 12:17 PM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Working Width: 22 ft
Serial Number: YDD062220
Condition: Used
Field Ready: Yes
Mounting Type: Pull-Type
Rear Attachment: Yes
Description: NICE CASE IH 870 DISK RIPPER - 22' - CUSHION GANGS - CHOPPING ROLLING BASKET - GOOD WORKING CONDITION - OWNER UPDATED AND NO LONGER NEEDS - FOR MOR...
Updated: Wednesday, August 19, 2026 12:14 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Hours: 4,600
Separator Hours: 2,300
Drive: PRWD
Rear Attachment: Straw Chopper / Spreader Combo
Horsepower: 350 HP
Serial Number: C4800207
Description: NICE CLAAS LEXION 740 - 2,300 SEPARATOR HOURS - SUNNY BROOK CONCAVE AND CYLINDER BARS - SUNNY BROOK CHOPPER - NEW FUEL SYSTEM TWO YEARS AGO INCLUDI...
Updated: Wednesday, August 19, 2026 12:03 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Hours: 4,635
Separator Hours: 2,339
Drive: PRWD
Rear Attachment: Straw Chopper / Spreader Combo
Horsepower: 350 HP
Serial Number: C4800042
Description: NICE CLAAS LEXION 740 - 2,339 SEPARATOR HOURS - SUNNY BROOK CONCAVE AND CYLINDER BARS - SUNNY BROOK CHOPPER - NEW FUEL SYSTEM TWO YEARS AGO INCLUDI...
Updated: Wednesday, August 19, 2026 12:02 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Size: 1,000 bu
Tarp: Yes
Unloading Auger Position: Corner
Serial Number: B20000138
Condition: Used
Tires or Tracks: Tires
Description: 2003 UNVERFERTH 9200 CART - GOOD WORKING CONDITION - GOOD ROLL TARP - OWNER RETIRED AND NO LONGER NEEDS - FOR MORE INFORMATION CALL RODNEY @ 701-37...
Updated: Wednesday, August 19, 2026 11:18 AM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Size: 1,050 bu
Scale: Yes
Tarp: Yes
Unloading Auger Position: Corner
Serial Number: 507263
Condition: Used
Description: NICE KINZE 1050 GRAIN CART - WALKING TANDEMS - SCALE W/ SCREEN - ROLL TARP - EXCELLENT RUBBER - GOOD WORKING CART - OWNER RETIRED AND NO LONGER NEE...
Updated: Wednesday, August 19, 2026 11:09 AM
Location: Calvin, North Dakota
Seller: Moore Auctions LLC
Serial Number: Y168416000017
Condition: Used
PTO Speed: 1000
Tube Diameter: 16 in
Hyd Swing Hopper: Yes
Swing Away Hopper Mover: Yes
Description: NICE FARM KING 1684 AUGER W/ HYDRAULIC SWING AWAY HOPPER W/ MOVER - WORKS GREAT - OWNER UPDATED AND NO LONGER NEEDS - CONTACT THE OWNER RYAN @ 701-...
Updated: Wednesday, August 19, 2026 10:30 AM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Serial Number: UNKNOWN
Condition: Used
Hours: 2,828
Mixer Configuration: Horizontal
Description: CHEVY KODIAK MIXER TRUCK W/ 3116 CAT DIESEL AND AUTOMATIC TRANSMISSION - BOTEC 420 MIXER - RUNS DRIVES AND OPERATES AS IT SHOULD - COULD USE A LITT...
Updated: Wednesday, August 19, 2026 10:22 AM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Lot # 14330
TRI-STEEL
Other Equipment Specialty Crop Equipment
Auction Ended:Thu, Dec 18, 2025 01:02 PM (CST)
Serial Number: UNKNOWN
Condition: Used
Description: TRI STEEL CONVEYOR - USED AS DIRT CONVEYOR FOR FOR POTATOES - OWNER NO LONGER NEEDS
Updated: Thursday, December 18, 2025 01:18 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Number of Rows: 8
Row Spacing: 30 in
Serial Number: 95118H
Condition: Used
Snout Type: Metal
Description: JOHN DEERE 853 ALL CROP HEADER - 8 ROW 30 INCH - GOOD CONDITION - OWNER NO LONGER NEEDS
Updated: Wednesday, December 17, 2025 04:26 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Lot # 14332
JOHN DEERE 443
Row Crop Headers
Auction Ended:Wed, Dec 17, 2025 04:00 PM (CST)
Number of Rows: 4
Row Spacing: 30 in
Rolls: Standard
Serial Number: 005698H
Condition: Used
Chopping Capabillity: Non Chopping
Description: NICE 4R30 JOHN DEERE 443 CORN HEADER - GOOD WORKING HEADER - OWNER NO LONGER NEEDS
Updated: Wednesday, December 17, 2025 04:16 PM
Location: Edinburg, North Dakota
Seller: Moore Auctions LLC
Lot # 14299
2024 MAC DON FD245
Platform Headers
Auction Ended:Wed, Dec 17, 2025 03:36 PM (CST)
Cutting Width: 45 ft
Cutterbar Type: Flex
Auto Contour: Yes
Serial Number: 495100-24
Condition: Used
Fore/Aft Reel: Yes
Description: NICE 2024 MAC DON FD245 - DUAL KNIFE DRIVE - TRIPLE REEL - AUTO HEIGHT - EXCELLENT CONDITION - OWNER UPDATED AND NO LONGER NEEDS
Updated: Wednesday, December 17, 2025 03:52 PM
Location: Walhalla, North Dakota
Seller: Moore Auctions LLC
Lot # 14298
2024 MAC DON FD245
Platform Headers
Auction Ended:Wed, Dec 17, 2025 03:36 PM (CST)
Cutting Width: 45 ft
Cutterbar Type: Flex
Auto Contour: Yes
Serial Number: 495101-24
Condition: Used
Fore/Aft Reel: Yes
Description: NICE 2024 MAC DON FD245 - DUAL KNIFE DRIVE - TRIPLE REEL - AUTO HEIGHT - EXCELLENT CONDITION - OWNER UPDATED AND NO LONGER NEEDS
Updated: Wednesday, December 17, 2025 03:52 PM
Location: Walhalla, North Dakota
Seller: Moore Auctions LLC
